|
|
Joined: May 2005
Posts: 29
Member
|
OP
Member
Joined: May 2005
Posts: 29 |
I have a question concerning a MICS 4.0. Lines supplied by the CO are analog. The user is requesting voicemail service from the campus CO. The CO can provide a stutter tone as the MWI. If the CO sends a message waiting light signal is it possible to light a message waiting key on 7310 and 7324 telephones?
Thanks
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
Probably but you will have to have Caller ID Trunk Cards. You would only need the trunk card in the position for the line or lines it comes in on.
|
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
Sorry if its an 8 by 24 MICS you would need an external adapter for caller ID. I believe its an M8 unit from nortel.
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
Bob3470
You're mixing up a MICS & a "Modular 8x24". 2 different systems. A MICS needs CLID cards as does a Mod 8x24 for lines 9 & up. On a Mod 8x24 you need the M8 for the 1st 8 lines.
Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
|
|
|
|
|
Joined: May 2005
Posts: 29
Member
|
|
OP
Member
Joined: May 2005
Posts: 29 |
Thanks for the responses. Why are CLID cards needed, and what programming would be required?
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
Card is a minimum NT5B41GA or GB or the newer "Global" cards NT7B75AAAC or NT7B75AAAE.
Enable CID in several areas of programming, depending on how you want to set it up.
Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: May 2005
Posts: 29
Member
|
|
OP
Member
Joined: May 2005
Posts: 29 |
I want to set a message waiting indicator from an external VMS to light a message waiting key. I am not clear as to why I need the CLID card to allow an external VMS to light a message waiting key on a 7310 telephone. If CLID is needed to accomplish this, do I need target lines as well.
Thanks.
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
You don't need a CLID card to turn on external message waiting. Telco features just turn on Ext Message waiting and the display on the set will show message for you. You can even program the number to access the mail from the telco and if you have a 7310 it will dial if you press the MSG call key. It won't light an idividual key though, just the display.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: May 2005
Posts: 29
Member
|
|
OP
Member
Joined: May 2005
Posts: 29 |
Tanks for the information. I will give it a try.
|
|
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
127
guests, and
238
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
