|
|
Joined: Apr 2005
Posts: 194
Member
|
OP
Member
Joined: Apr 2005
Posts: 194 |
I set up a mailbox for outbound transfer, greeting tells customer to press 7 to reach the on call with the cell phone, message states not able to no available, do I need a routing table, also what are the exact steps just want to make sure I programmed everything correctly.
Thanks
Gil Medina
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 194
Member
|
|
OP
Member
Joined: Apr 2005
Posts: 194 |
The error message we are getting states the routing info is not valid I hope this helps.
|
|
|
|
|
Joined: Jun 2007
Posts: 58
Member
|
|
Member
Joined: Jun 2007
Posts: 58 |
Check to make sure all lines are supervised. If using a line pool to transfer the call, make sure you have lines assigned to the pool.
Brian Cox
J & J Communications
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Yes you need to create a destination code. You'll find it under routing services.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Jun 2007
Posts: 58
Member
|
|
Member
Joined: Jun 2007
Posts: 58 |
We have a BCM 400 and did not need to program any sort of routing or destination codes to get outbound transfer from a mailbox to work. Just designated the pool to use and the number to outdial.
External call forward from a phone does require routing to be setup.
Brian Cox
J & J Communications
|
|
|
|
Forums84
Topics94,300
Posts638,879
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Touch Tone Tommy),
87
guests, and
237
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
