 Call Pilot 150 upgrade | Joined: Jun 2004 Posts: 100 Member | OP  Member Joined: Jun 2004 Posts: 100 | Upgrading an MICS to 7.1 XC I was told I have to upgrade my CP to Release 3.0 (I believe it is 2.1 now) Is it just a question of purchasing another flash card and if so will all my programming on the CP remain when I swap them out?
Is there a less expensive way also? | | |
Re: Call Pilot 150 upgrade
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
I know the compatibly sheet says 3.0 software for 7.1, but I have seen 2.1's working off 7.0 and it shows 3.0 as the software level to work with????
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
Re: Call Pilot 150 upgrade | Joined: Jun 2007 Posts: 58 Member | | Member Joined: Jun 2007 Posts: 58 | The upgrade is a flash card that goes into the top slot of the CP. All programming is retained, but the upgrade can take up to an hour to complete.
Brian Cox
J & J Communications
| | | Re: Call Pilot 150 upgrade | Joined: Jun 2004 Posts: 100 Member | | OP Member Joined: Jun 2004 Posts: 100 | Do i upgrade the MICS first and then the CP150 or both at the same time | | | Re: Call Pilot 150 upgrade | Joined: Jun 2007 Posts: 58 Member | | Member Joined: Jun 2007 Posts: 58 | Upgrade the CP150 first, then the MICS.
Brian Cox
J & J Communications
| | | | | WebRTC by Coral Tech - 09/30/20 01:50 PM
| | | | | | | | |
29 members (Touch Tone Tommy, crazy canuck, Yoda, Ruben, Bob3470, Memphisribs, jknichols, Professor Shadow, LenShustek, KRRath, RATHER BE FISHING, Iwatsu Guru, STS E, justbill, gelehu, Daniel, Noobed2336, ChrisNI, ABLE1, erniejoey, Carl Navarro, vicbob, BobRobert, metelcom, MooreTel, Hofman telekom, RonP, phonman123, EV607797),
477
guests, and
77
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics93,979 Posts637,384 Members49,357 | | Most Online5,661
May 23rd, 2018 | | |
|
