|
|
|
|
Joined: Jun 2004
Posts: 100
Member
|
|
Member
Joined: Jun 2004
Posts: 100 |
Upgrading an MICS to 7.1 XC I was told I have to upgrade my CP to Release 3.0 (I believe it is 2.1 now) Is it just a question of purchasing another flash card and if so will all my programming on the CP remain when I swap them out?
Is there a less expensive way also?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
I know the compatibly sheet says 3.0 software for 7.1, but I have seen 2.1's working off 7.0 and it shows 3.0 as the software level to work with????
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Jun 2007
Posts: 58
Member
|
|
Member
Joined: Jun 2007
Posts: 58 |
The upgrade is a flash card that goes into the top slot of the CP. All programming is retained, but the upgrade can take up to an hour to complete.
Brian Cox
J & J Communications
|
|
|
|
|
Joined: Jun 2004
Posts: 100
Member
|
|
Member
Joined: Jun 2004
Posts: 100 |
Do i upgrade the MICS first and then the CP150 or both at the same time
|
|
|
|
|
Joined: Jun 2007
Posts: 58
Member
|
|
Member
Joined: Jun 2007
Posts: 58 |
Upgrade the CP150 first, then the MICS.
Brian Cox
J & J Communications
|
|
|
|
Forums84
Topics94,565
Posts640,181
Members49,871
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Carl Navarro),
116
guests, and
291
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
