|
|
|
|
Joined: Apr 2007
Posts: 421
Member
|
OP
Member
Joined: Apr 2007
Posts: 421 |
The problem is with setting DHCP "IP Phones only". I had this set on a BCM400 4.0. The BCM is on the customers network. The problem is that the PC's were being given strange addresses through DHCP instead of the configured addresses from their DHCP server. They disconnected the BCM from the network, restarted the PC's and all was well. My understanding is that the BCM will not hand out IP addresses to any device but IP phones only. Has anyone had any experience with this?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Were the PCs getting addresses within the range defined by the scope on the BCM?
Yes, I've had problems with the 'IP Phones only' setting, but the problem wasn't with the PC's addresses.
What is the DHCP server that is supposed to be handing addresses to the PCs? If you can configure vendor specific options within the scopes defined on that device, that would be a more appropriate/reliable configuration.
|
|
|
|
|
Joined: Apr 2007
Posts: 421
Member
|
|
OP
Member
Joined: Apr 2007
Posts: 421 |
I am out of town and was informed of this issue yesterday. I don't have the details. I did ask what IP address that the PC's were getting and they couldn't tell me. At this time the BCM does not have any IP phones connected to it. I set it up as "IP Phones only" for future use. That may not have been the best idea.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, jkmartin),
139
guests, and
294
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
