|
|
Joined: Jul 2006
Posts: 90
Member
|
|
Member
Joined: Jul 2006
Posts: 90 |
I've got a Nortsar-PLUS MICS at home with version 6.0. I purchased a CI (Caller ID) card. Originally I had a LS/DS card in slot 4 and all was good. When I plug the new Caller ID Card in Slot 4 dial tone and everything is good. Just experimenting I plugged the CI in Slot 3 and now no dial tone. Why? I thought it did not matter which of these slots (3 or 4) you plugged the module in.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Slot 4 is for your first 4 trunks.
Slot 3 is for your next 4 trunks.
You MAY plug it into slot 3 but now you do not have trunks 1-4, but now have the next 4 trunks in the system which are 31-34.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Jul 2006
Posts: 90
Member
|
|
Member
Joined: Jul 2006
Posts: 90 |
Thanks NTlayoff. I think I've got a problem that is not related to the Slots. Here it is. I installed a new CLID card. I installed it in slot 4 on the Norstar-PLUS Modular ICS ver. 6.0. After I installed it my StarTalk Flash 2.0.10 quit working. I went into maintenance and it does not see the port. I also put a RAD on that port and it sees it. I have another StarTalk Flash and it does not see it also. Cannot understand that. Or is it not related to the Caller ID card at all?
|
|
|
|
|
Joined: Jun 2006
Posts: 8,735 Likes: 12
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,735 Likes: 12 |
Did you reboot the system &/or the Flash & did you wait long enough for the Flash to kick in?
Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Jul 2006
Posts: 90
Member
|
|
Member
Joined: Jul 2006
Posts: 90 |
Yes I did. I've been at this for a few hours. I powered down both pieces of equipment. Wait few minutes. Power up the KSU first then the StarTalk. Still will not recognize any of the voice mail when connect to the KSU. Will recognize other equipment on any or or same port I put the voice mail but will not recognize the voice mail.
|
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
lines are number 1,2,3,4 then 33,34,35,36..so if you moved card u must move x-conn and reprog sys for new lines
|
|
|
|
|
Joined: Jun 2006
Posts: 8,735 Likes: 12
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,735 Likes: 12 |
Originally posted by luv2ski:
lines are number 1,2,3,4 then 33,34,35,36..so if you moved card u must move x-conn and reprog sys for new lines It shouldn't have anything to do with it until you enact it. I believe his problem is he can't "see" the Flash. If it's connected to the same port as it was, and you can see it, get into it, but NOT answering lines, then luv2ski is right. Even if it was connected to a new DN, you should eventually see it. Flash units can be like my wife...tempermental to say the least. Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Jul 2006
Posts: 90
Member
|
|
Member
Joined: Jul 2006
Posts: 90 |
Yes, it is connected to the same port. I will not see the StarTalk Flash. I moved it to other ports and it does not see it on either of the other ports.
|
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
reseat pcmia card on flash..make sure the line cord is plugged into correct port in flash
|
|
|
|
|
Joined: Jul 2006
Posts: 90
Member
|
|
Member
Joined: Jul 2006
Posts: 90 |
Done that at least three (3) times. Did not work.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
299
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
