|
|
Joined: May 2007
Posts: 12
Member
|
OP
Member
Joined: May 2007
Posts: 12 |
I trying to get a remote backup of an Option 11c...however when I dialup, get my connection, query LD 143 and do XBK...input my info...the connection comes back with message: BKP0008 which is transmission error and CCBR0001 invalid command. I suspect maybe my modem settings for the modem connected to the TTY might be wrong...any ideas. I know the modem connection is good because I can do everything else I need to....just not a remote backup. I am using a Robotics 33.6 faxmodem
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Aug 2007
Posts: 34
Member
|
Member
Joined: Aug 2007
Posts: 34 |
|
|
|
|
Joined: Oct 2006
Posts: 9
Member
|
Member
Joined: Oct 2006
Posts: 9 |
Dip Switches
#1 Down data terminal ready override #2 Up verbal results code #3 Up suppress results code #4 Down no echo, offline commands #5 Up auto answer first ring or higher if NVRAM requires #6 Up carrier defect normal #7 Up load NVRAM defaults #8 Down dumb mode Equipment used: US ROBOTICS Model: 0701 Sportster Fax/Modem 33.6 8 dip switches on the back for configuration of the modem
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
Member
Joined: Nov 2004
Posts: 222 |
Also make sure that the protocol is set to X MODEM
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
92
guests, and
323
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|