|
|
Joined: Nov 2007
Posts: 50
Member
|
Member
Joined: Nov 2007
Posts: 50 |
ok, when I call my DID, instead of ringing the phone it gets modem tone as soon as I dial the number. Is there any reason this is happening???
Best Regards Chris Espinoza
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
A) Programmed wrong B) dialed the wrong number
Check your line assignments. Find what target line is assigned to that ext. Then check that target number for the correct received number. Also check the Prime set for that Target line. Then also check your other devices that would give you a tone for what target line you assigned to them. Could be the same number.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
Member
Joined: Nov 2007
Posts: 50 |
i'm starting to think the block of DID's they gave me are wrong because I tried to call some of the other did's on the list and other company's have answered...go figure...
Best Regards Chris Espinoza
|
|
|
|
Joined: Nov 2007
Posts: 50
Member
|
Member
Joined: Nov 2007
Posts: 50 |
ok, what all needs to be programmed to get the DID to work?? I have went over and over the manual.. I have found the correct block of DID's and did everything I knew to do and now they are busy when I try to call the DID....
Best Regards Chris Espinoza
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Get T1 circuit working. Know how many digits they are sending you. Enter numbers in Target lines. Assign target lines to phones.
If you are not sure how to do all of this, I suggest you get a vendor in to do this for you.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
Member
Joined: Feb 2006
Posts: 598 |
Originally posted by NTlayoff: Get T1 circuit working. Know how many digits they are sending you. Enter numbers in Target lines. Assign target lines to phones.
If you are not sure how to do all of this, I suggest you get a vendor in to do this for you. Enter Receive digits in target lines. And as NT says if you are not a trained installer on Nortel equipment, DIDs are not the easiest thing to get your head around. Prime to set...Ring group if you have night service and on and on and on.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
Forums84
Topics94,513
Posts639,938
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
1 members (BobRobert),
173
guests, and
49
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|