|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
I've done Norstars for a long time but only one BCM50 and I'm supposed to go back up the system programming prior to installing a UPS. Is there a program to back up programming on the BCM50 itself or a laptop program? Thanks, Bunnie If anyone has a BCM50 manual they could email me, I would be very thankful. It is not terribly different from a MICS/CICS but enough so that I would like to have a manual to save my tail if needed. [email protected] if you have a .pdf to spare, thanks
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Back up is a function in the BCM element manager. No special software required.
All manuals for the BCM are stored on the unit itself. Go to the IP address of the unit using an internet browser.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
Are you worried about loosing programming on the power cycle? BCM 50's are solid in retaining there programming information on power cycles.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
I was originally called to this job on an emergency basis because the installers had no one to send and they lost half of their programming on a power failure.
It was very weird, they couldn't make calls out, only one phone rang, extensions were changed and all the individual DIDs rang at one phone but the fax DIDs were unaffected and the button programming stayed.
I am hesitant to power down without a backup per the system saving it, I was there three hours trying to get everything working again.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Jun 2007
Posts: 40
Member
|
|
Member
Joined: Jun 2007
Posts: 40 |
I have to disagree with Nickels. There was a batch of BCM50 R2's that have major issues with programming loss after power cycles. There's even a patch for it. NNU patch if I recall correctly.
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
TJK- I was pretty sure these patches Nov 28th 35-OAM, 38-CORE, and 88-NNU were intended for pre 2.0 BCM50's. These were the patches Nortel came out with after some interconnect companies logged identical tickets of techs programming the BCM at there office and then taking it to site and missing different telephony programming. But from what Bunnie is saying, must be the 2.0's also.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Jun 2007
Posts: 40
Member
|
|
Member
Joined: Jun 2007
Posts: 40 |
The NNU patch was indeed for the R2's. It is now incorporated into the BCM50R2 System.006 patch that is GA on the Nortel site. Hope it doesn't carry over into the R3's.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Thank you so much for the info. I did obtain a set of complete documentation for the BCM 50 R2 off eBay for $9.99. The guy was selling Nortel test exams.
If anyone wants it for free, just PM me and it is yours.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,521
Posts639,995
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
162
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
