|
|
|
|
Joined: Jun 2005
Posts: 64
Member
|
OP
Member
Joined: Jun 2005
Posts: 64 |
I have an option 11 and I can't figure out why the manual forward to international numbers doesn't work. Calls are routing out over a PRI and I have no problem call forwarding to local or a long distance number.
I can manually dial out internationally from the dn but I can't seem to get the forwarding to intl from the same dn to go.
I've extended the cfw digits field to 20 in the dn programming to accomodate the longer dial string for intl calls but everytime a call is transferred(from the attendant) to the dn it never goes anywhere, the attendant gets a busy and the call just drops.
I'm not super sharp on the Nortel but I would appreciate any help to get me looking in the right direction, thanks.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
It's probably a carrier issue... not allowing it.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Jun 2005
Posts: 64
Member
|
|
OP
Member
Joined: Jun 2005
Posts: 64 |
Thanks Marv for taking the time to post a reply however I am able to manually dial int'l from the same phone set that I'm trying to forward from, it doesn't seem that the call is even getting out of the PBX. If I can dial the number manually why would the carrier not allow or recognize the same number if it is dialed thru the call forward?
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (teleco),
88
guests, and
187
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
