|
|
|
|
Joined: May 2001
Posts: 91
Member
|
OP
Member
Joined: May 2001
Posts: 91 |
I have a MICS hooked up to a Call Pilot 150 with 6 incoming lines. All six lines are in a hunt group from telco. When 5 out of the 6 lines are being used the 6th caller receives a busy? Any ideas? Thanks
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: May 2005
Posts: 1,106
Member
|
|
Member
Joined: May 2005
Posts: 1,106 |
Does your fifth line roll over to linee six?
Check with your telco
Kristopher
|
|
|
|
|
Joined: Jun 2006
Posts: 512
Member
|
|
Member
Joined: Jun 2006
Posts: 512 |
Pick up line 5 and dial line 5,see if line 6 starts ringing .
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
Are you sure that Line 6 is not the fax or modem line somewhere and therefore not in the cascade?
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
|
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
Originally posted by jacktel:
Pick up line 5 and dial line 5,see if line 6 starts ringing . Put lines 1 thru 5 on hold. From your cell phone, call the main published number. It should ring in on line 6. If not, then the telco hunt group isn't configured right. Jim
|
|
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
181
guests, and
234
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
