Setting Call Restrictions on Outgoing Calls BCM 400

Print Thread

Rate Thread

Setting Call Restrictions on Outgoing Calls BCM 400 #138562 04/24/08 10:12 AM
Joined: Feb 2007 Posts: 100 New York Tuned Member
Tuned Member Joined: Feb 2007 Posts: 100 New York	The director of one of our sites just called asking if it's possible to place a block on certain outbound calls (1900). I checked the restriction filters on the phones and see that they all have restriction 2 set for the normal schedule. Can I just add the add a filter to rule 2 and that be sufficient or do I still need to add it to the lines themselves. If 9 is needed for a secondary dial tone to dial out should the filter then be 91900?

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Setting Call Restrictions on Outgoing Calls BCM 400 #138563 04/24/08 10:28 AM
Joined: Jun 2006 Posts: 8,735 Likes: 12 Sherbrooke, Quebec, Canada MooreTel Moderator-Nortel, Computers, General
MooreTel Moderator-Nortel, Computers, General Joined: Jun 2006 Posts: 8,735 Likes: 12 Sherbrooke, Quebec, Canada	I don't know much about the BCM line, but assuming it is the same as a normal system, filter 2 is the default (No restrictions). Look at filter 1, which is preprogrammed with the normal restrictions. Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!

Re: Setting Call Restrictions on Outgoing Calls BCM 400 #138564 04/24/08 04:13 PM
Joined: Oct 2005 Posts: 4,685 Likes: 4 Ottawa, ON. Canada telemarv Member
telemarv Member Joined: Oct 2005 Posts: 4,685 Likes: 4 Ottawa, ON. Canada	Quote Originally posted by Tuned: If 9 is needed for a secondary dial tone to dial out should the filter then be 91900? Yes. Don't forget 9*671900 as well. Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990

Re: Setting Call Restrictions on Outgoing Calls BCM 400 #138565 04/25/08 02:33 AM
Joined: Feb 2007 Posts: 100 New York Tuned Member
Tuned Member Joined: Feb 2007 Posts: 100 New York	Thanks MooreTel and telemarv. I see that all the restrictions are in place on filter 1 but that one was never set active on any phones. I modified filter 2 to include both 91900 and 9*671900 for now. Thanks.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Setting Call Restrictions on Outgoing Calls BCM 400