|
|
Joined: Apr 2005
Posts: 145
Member
|
Member
Joined: Apr 2005
Posts: 145 |
Vad, how could it be Fios or Verizons problem when they are only using IP internally? I am not using the internet for transport. Or am I getting confused with replies to Sqrats like problem?
Communication Essentials
Newton, NJ
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 145
Member
|
|
Member
Joined: Apr 2005
Posts: 145 |
Originally posted by Michaelq:
Make sure you are using a network switch not a network hub. I used a Dlink QOS router for my home network and since I installed it I have had no problems with my ip phone. Did you test the lines with a buttset at the D-marc. Mike the customer provided the switch and probably bought it from Radio Sh...I don't know what brand......
Communication Essentials
Newton, NJ
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Originally posted by Johnthephoneman: Originally posted by Michaelq:
[b] Make sure you are using a network switch not a network hub. I used a Dlink QOS router for my home network and since I installed it I have had no problems with my ip phone. Did you test the lines with a buttset at the D-marc. Let me point you back to my 1st post :read:
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
John,
Are you saying that you have FiOse only for high speed and use Analog line Installed separetelly? I think you are making a mistake.
|
|
|
|
|
Joined: Apr 2005
Posts: 145
Member
|
|
Member
Joined: Apr 2005
Posts: 145 |
Vad, yes the customer is using analog lines on IP telephones. I agree that the customer made a mistake buying IP telephones to use on analog lines. I didn't sell it, a distributor we work with did. We were only originally hired to program it. Of course we had to rewire sparkies work and redo the jacks but I degress.........
As for the lines.......actually helps the arguement re VOIP. Why do it yourself, be responsible for QOS, worry about down time etc. when the phone company offers an all you can dial service with SLA's. Its not like this Electrical contractor has IPT applications.
Communication Essentials
Newton, NJ
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
So, what happend when you disconnect the lines from system and test'em at D-mark? Do you still have echo?
|
|
|
|
|
Joined: Oct 2007
Posts: 49
Member
|
|
Member
Joined: Oct 2007
Posts: 49 |
IP sets with Analog lines is a known issue with BCM50 ver 2 and 3 . Need to have correct patches to fix it . You can also try to set loss package to short which would help on the built in 4 co lines. Funny is some patches fix this echo problem and if you add other patches on top , it will break !!!!
After patch is applied you need to tune the GATM4 by either reboot the BCM50 or disable the GATM4 and then unable it.
I had about 3 BCM50 ( v 2 and 3 ) with this problem ONLY with IP sets , Digital sets are fine. Lines are fine as far as I tested with the butt set.
|
|
|
|
|
Joined: Apr 2005
Posts: 145
Member
|
|
Member
Joined: Apr 2005
Posts: 145 |
THANK YOU MADWOK!
The digital telephones are fine, as are the lines.
My vendor's technical support never mentioned any patches that could help.
Thank you
Communication Essentials
Newton, NJ
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
169
guests, and
340
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
