|
|
|
|
Joined: Feb 2007
Posts: 232
Member
|
OP
Member
Joined: Feb 2007
Posts: 232 |
System is MICS w\6.1 XC software running 22 channels on a T-1 thru a DTI card.
Channels/trunks 1-5 are set as DID, 6 & 7 set as E & M, 8-22 are set as loop start. Outgoing voice calls are on channels 6-12 in line pool A.
I'm getting the following errors:
EVT 820-041112
EVT 820-000502
EVT 820-010502
The manual says event 820 is a "Line driver problem". Can anyone shed more light on this problem as to what it really means and possible causes\solutions? :shrug:
Any help would be greatly appreciated. Thanks.
The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence - Charles Bukowski
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
123
guests, and
345
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
