|
|
|
|
Joined: Dec 2007
Posts: 114
Member
|
|
Member
Joined: Dec 2007
Posts: 114 |
I have a customer with a BCM 400 version 3.6. Their receptionist phone has "Alarm 75" showing, and when they hit clear, it goes away for 5-10 minutes then comes back. Is this something I would have to clear by going into the programming? Thanks!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2008
Posts: 30
Member
|
|
Member
Joined: Jun 2008
Posts: 30 |
In my experience this is usually caused by a slip in the T1/PRI circuit.
|
|
|
|
|
Joined: Jul 2008
Posts: 13
Member
|
|
Member
Joined: Jul 2008
Posts: 13 |
If it continually shows up, you have a clocking problem.
Alarm 75 is reporting that the BCM is no longer synchronized with the T1/PRI network.
Have Telco check it out or replace their NIU.
|
|
|
|
Forums84
Topics94,572
Posts640,225
Members49,874
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
70
guests, and
213
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
