|
|
|
|
Joined: Dec 2004
Posts: 49
Member
|
|
Member
Joined: Dec 2004
Posts: 49 |
i have a doorbox that ring on a line. I have confirmed the ring tone up the trk. I made a prt out on the 2 phones where it is suppose to ring, but do not see the keys programmed at all. I suppose it should point to a phantom, that is the line. I am not sure how to program a phantom so the line points to it. Your help would be appreciated.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
There are many ways to hookup a doorbox on an Option. It could be on a single line port with MNL or HTL service. It could be interfaced with a CO line. Does this currently work on the two phones yur printed out?
|
|
|
|
|
Joined: Dec 2004
Posts: 49
Member
|
|
Member
Joined: Dec 2004
Posts: 49 |
It currently rings in on a trk. it does not ring on the phones, use to, just stopped. If I print the trk/line, it shows me prdn 7600. I guess I have to put 7600 on a key, right? is it ld 11, chg, key scr 01 (key 1) 7600? I am not sure. the phone is a 2616 and shows only key 00.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
342
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)