|
|
Joined: Dec 2008
Posts: 19
Member
|
OP
Member
Joined: Dec 2008
Posts: 19 |
I'm trying to set a transfer path to an external number. Path#3,transfer,external(tried all combination of inputs sa:pause,wait for dial tone etc.) I can see the system access the line or a line on a pool that I designate but, I get a message that the line or pool is not valid. The MICS has loop start trunks with supervision on. Any Ideas?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jun 2005
Posts: 2,256
Member
|
|
Member
Joined: Jun 2005
Posts: 2,256 |
What software is the MICS/ Flash?
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
You must use a route/destination
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Dec 2008
Posts: 19
Member
|
|
OP
Member
Joined: Dec 2008
Posts: 19 |
MICS 5.0/N*FLASH 2.1.00
Marv,not sure what you are saying. This is for a Transfer Point on CCR Tree.
|
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
|
Member
Joined: Nov 2004
Posts: 222 |
Make sure lines are supervised
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Although you are given an option to use a line pool in the set up of a transfer point, you must use a route and destination instead. Or you can use a link transfer if your lines are equiped with three way calling.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Dec 2008
Posts: 19
Member
|
|
OP
Member
Joined: Dec 2008
Posts: 19 |
Thanks Marv, I'll give that a try.
|
|
|
|
Forums84
Topics94,290
Posts638,801
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
112
guests, and
406
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
