External transfer using ftr 71

Print Thread

Rate Thread

External transfer using ftr 71 #145441 12/22/09 02:52 AM
Joined: Jan 2006 Posts: 9 California norteltom Member
norteltom Member Joined: Jan 2006 Posts: 9 California	I have a Mics 7.1 I am trying to do an external tranfer using ftr 71. I have set the co's to link at co. When I receive the first call I press ftr 71 and get the second dialtone . I am able to make the 2nd call but I can't join the calls by hanging up. Is there another step I am missing? Thanks

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: External transfer using ftr 71 #145442 12/22/09 03:35 AM
Joined: Sep 2005 Posts: 38 Los Angeles, CA USA A2Xprt Member
A2Xprt Member Joined: Sep 2005 Posts: 38 Los Angeles, CA USA	Have you verified that this service is active with the Carrier? Your CO lines would need to have this feature turned on, as once linked from the Norstar, the CO takes ownership of the call from there.

Re: External transfer using ftr 71 #145443 12/22/09 03:55 AM
Joined: Jan 2006 Posts: 9 California norteltom Member
norteltom Member Joined: Jan 2006 Posts: 9 California	I will check with the carrier. But Is there another step after making the second call to join the 2 calls? Thanks

Re: External transfer using ftr 71 #145444 12/22/09 04:20 AM
Joined: Aug 2004 Posts: 1,756 Likes: 49 Calgary, AB, Canada Toner Admin
Toner Admin Joined: Aug 2004 Posts: 1,756 Likes: 49 Calgary, AB, Canada	I think you need to use Ftr 71 a 2nd time to join the calls. Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!

Re: External transfer using ftr 71 #145445 12/23/09 06:16 PM
Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska ffej010 Member
ffej010 Member Joined: Jan 2009 Posts: 854 Likes: 1 Nebraska	Make sure that your line has the transfer feature from the carrier. You may also need 3 way calling added to the line as well to take full advantage of this.

Re: External transfer using ftr 71 #145446 12/25/09 05:10 AM
Joined: Sep 2009 Posts: 173 Kansas russell4444 Member
russell4444 Member Joined: Sep 2009 Posts: 173 Kansas	You do need to link twice to make a conference, then hang up and leave the two trunks connected.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems External transfer using ftr 71