|
|
Joined: Apr 2009
Posts: 23
Member
|
OP
Member
Joined: Apr 2009
Posts: 23 |
Not sure best place to post this but will try Intertel forum as well.
I am trying to get a Mitel 5000 connected to a Nortel option 81 via a T1/E1 module on the 5000 to a Dual Pri on the Nortel.
I can make a call from the 5000 to the Nortel but there is no speech and then the call drops.
I have a Nortel engineer available but he is running out of ideas. The Nortel card is set as master/Tie line/euro.
Any ideas out there as to why we can't get the two 'talking'?
|
|
|
|
|
Joined: Aug 2004
Posts: 1,478 Likes: 13
Admin
|
|
Admin
Joined: Aug 2004
Posts: 1,478 Likes: 13 |
Do a D channel trace in LD 96:
enl msgo xx
enl msgi xx
Make sure you disable when done.
|
|
|
|
|
Joined: Apr 2009
Posts: 23
Member
|
|
OP
Member
Joined: Apr 2009
Posts: 23 |
Thanks Toner I will pass on your comments.
|
|
|
|
Forums84
Topics93,881
Posts637,005
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (mtncomm1, newtecky),
69
guests, and
15
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from web.atcomsystems.ca]](http://web.atcomsystems.ca/pic/atcom_logo_60px-high.png){kind=logo}