|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
I just upgraded a BCM 400 from 3.6 to 4.0. The supplied material says if you have a BCM 1000 Expansion Gateway, that must be upgraded first with a different upgrade tool. Are they talking about the Expansion cabinet that most BCM 400s have, or something different?
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
I think what it means is if you have a remote location that you have a 1000 at, and connecting to it via the gateway, it needs upgraded first.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Mar 2005
Posts: 245
Member
|
|
Member
Joined: Mar 2005
Posts: 245 |
I found out what it was. It apparently is (was) a piss-poor way of increasing the capacity of the BCM, that is (was) almost as expensive a buying another BCM.
NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0
MITEL 5000 3300 NuPoint
"If I had known it would turn out like this, I would have become a locksmith"
Albert Einstein
|
|
|
|
Forums84
Topics94,556
Posts640,128
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
41
guests, and
77
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
