System CLID or PRI CLID?

Print Thread

Rate Thread

System CLID or PRI CLID? #147076 07/13/10 01:30 PM
Joined: Mar 2005 Posts: 245 TN, USA Crowtalks Member
Crowtalks Member Joined: Mar 2005 Posts: 245 TN, USA	I have a CS1000E 5.5 customer that wants to send system specific outgoing CLID info through the PRI. Up to this point, the telco has been sending out the main billing number (555-1555) for every call. I have built several CLID entries in LD 15, none of which are 5551555. I have assigned the different entries to the DNs desiring them. Our telco translations person says that she has modified the PRI to allow the PBX to send out it's own CLID info, but I am still sending 555-1555 from system-wide and she says that it has to be coming from me. Is there somewhere else in my switch where this could be built and which would override my CLID tables? NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0 MITEL 5000 3300 NuPoint "If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: System CLID or PRI CLID? #147077 07/13/10 02:01 PM
Joined: Aug 2004 Posts: 9,172 Likes: 22 Eastern North Carolina RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,172 Likes: 22 Eastern North Carolina	I had this once before and it was in the BARS/NARS tables. Think the default was sending E164 code and needed to be changed...I'll have to dig up my old old old notes.

Re: System CLID or PRI CLID? #147078 07/14/10 01:16 AM
Joined: Mar 2005 Posts: 245 TN, USA Crowtalks Member
Crowtalks Member Joined: Mar 2005 Posts: 245 TN, USA	Thanks! NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0 MITEL 5000 3300 NuPoint "If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

Re: System CLID or PRI CLID? #147079 07/15/10 03:50 PM
Joined: Mar 2005 Posts: 245 TN, USA Crowtalks Member
Crowtalks Member Joined: Mar 2005 Posts: 245 TN, USA	Someone suggested a D-CH msg (I never thought of it).I found I was sending the correct CLID info and translations had to go back to the drawing board. Late this afternoon she discovered a parameter she had overlooked. It works like I anticipated it would. NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0 MITEL 5000 3300 NuPoint "If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems System CLID or PRI CLID?