|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
It always aggrevated me that Nortel didnt use standard fiber connectors. Is it possible to connect a 016 Station Module to an MICS by using standard fiber? The situation is my customer wants to connect phones to an outlying building. Getting cooper there is possible, but expensive. They already have some vacant fiber pairs. Are there any adapters that might allow me to connect a station module across this fiber back to the main MICS?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
Member
Joined: Mar 2001
Posts: 3,869 |
Maybe someone knows for sure but easy to check out.
Go to some place like Graybar and buy a long fiber cable. Grind down the plastic on the ends so they can poke in the MICS hole.
It should just be light going from one place to another but there could be some limitation such as 50 or 100 or 300 feet, you would have to check it out. I don't think there would be that much loss in a hundred feet.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
Member
Joined: May 2007
Posts: 231 |
Mck made fiber extenders for just what you are looking to do. Also i believe with out the extender your module will not work.Im thinking about 6 to 8 feet is limit on fiber patch.
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
Okay..sounds like it might be easier just to string some 25 pair and be done.
|
|
|
Forums84
Topics94,514
Posts639,943
Members49,846
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
128
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|