|
|
Joined: Jun 2008
Posts: 32
Member
|
OP
Member
Joined: Jun 2008
Posts: 32 |
Hey everyone. Has anyone else been having trouble with Caller ID and new 7.1 CICS. We have a couple of customers that CID is not working on a particular line of their CICS. We do get CID on the RJ and when we frog the lines it works on the new line port. Replacing the CID card does not fix the problem but swapping out the KSU has worked a couple of times although at one site they are still having the same problem with the new KSU. All problem systems have the same carrier but as I said, we do get the CID signal with our butt sets at the RJ. Any ideas or similar issues?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
I have had many 7.1 systems. But I have not had any problems with CLID on them. Does not mean you don't have a problem.
But also, the systems that have had a problem it was just programming oversight. Just missed one prompt somewhere.
That may or may not be your problem. Can I assume you have double checked all your programming?
Other than that, I have no other ideas.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
FWIW: I've had CID blocked by lightning protectors. Removed/replaced with bridge clips, CID starts working.
D. Ocean
Miami, FL
|
|
|
|
|
Joined: Jun 2008
Posts: 32
Member
|
|
OP
Member
Joined: Jun 2008
Posts: 32 |
The programming is correct. The problem moves with the line when i move it to another CO port. I'll look at the lightning protection, that is good to know.
|
|
|
|
|
Joined: Apr 2011
Posts: 2
Member
|
|
Member
Joined: Apr 2011
Posts: 2 |
Try hooking up a single line analog phone directly to the phone line (make sure it has CID capability)and see if CID information is passed on to it.
|
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
Originally posted by Ron L:
Try hooking up a single line analog phone directly to the phone line (make sure it has CID capability)and see if CID information is passed on to it. Originally posted by rwindom: All problem systems have the same carrier but as I said, we do get the CID signal with our butt sets at the RJ.
D. Ocean
Miami, FL
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
Originally posted by rwindom:
The programming is correct. The problem moves with the line when i move it to another CO port. I'll look at the lightning protection, that is good to know. That proves that it's a line problem. I've personally had the same situation on my main business line. Had to prove it to Bell and when they tested further, they found that I was getting the signal, but it was so weak, that it wouldn't give me the data.
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Jun 2008
Posts: 32
Member
|
|
OP
Member
Joined: Jun 2008
Posts: 32 |
Dave,
How did you prove to the carrier that it was their problem? They test it and say that it is OK on their end. Is there a certain voltage to look for when the CID info is sent?
Thanks for the help!
|
|
|
|
|
Joined: Jun 2006
Posts: 8,732 Likes: 2
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,732 Likes: 2 |
Sorry for forgetting to reply to this before....
Hooked up a CLID box at the DMark to prove it to him. He had checked at the terminal down the road. After showing him, he went back and tested again for the signal strength. How, I don't know, but would love to...
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
198
guests, and
332
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
