web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Feb 2009
Posts: 55
Member
OP Offline
Member
Joined: Feb 2009
Posts: 55
Hello Everyone,
I have a Customer upgrading a old 8-24 with 100+ users and 12 Analog Trunks to a new 0x32 with PRI. I have turned up 50+ PRIs before. I have never had a customer demand that they not have to dial the 9 proir to the number. I have always just told them that it was required. This customer had Line Pool A access button programed on each phone and does not want to adjust to dialing the 9. I am trying to think of a way to insert the 9 but I figure someone else has probably already faced this issue and can save me some time.

Any help will be appreciated.

Thanks
Mark Mc

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Oct 2005
Posts: 4,685
Likes: 4
Member
Offline
Member
Joined: Oct 2005
Posts: 4,685
Likes: 4
You can set a speed dial button that dials 9 and label it "LINE OUT"


Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
Joined: Feb 2009
Posts: 55
Member
OP Offline
Member
Joined: Feb 2009
Posts: 55
Marv,
Thanks that is a great idea. I am not sure what software level the customer has purchased yet. ( I am doing this the reprogramming as a Sub.) If it is 7.1 I should be able to setup a second dialtone which will end up being the first for them to hear.

I really appreciate your advise.

Mark Mc

Joined: Feb 2009
Posts: 55
Member
OP Offline
Member
Joined: Feb 2009
Posts: 55
Marv,
I also appreciate your advice. LOL

Joined: Apr 2011
Posts: 108
Member
Offline
Member
Joined: Apr 2011
Posts: 108
FYI, this can be accomplished by routing and destination codes, just in case you find a customer that wont accept the line out button either (which admittedly, happens 2 out of 100 times) You would also need to set the phones to a line pool when a phone goes off hook instead of the intercom.

Joined: Sep 2009
Posts: 173
Member
Offline
Member
Joined: Sep 2009
Posts: 173
Tell them that's the way the damn system works with PRI. If they don't like it, switch them back to COTs. You can setup a prime line to intercom and then set them up to an external hotline to the number 9. They then pickup the phone and are ready to dial out. If they want to dial an internal number, then they have to push the INT button before picking up the phone. If you turn on pre-dial they dial what ever number they want first, then pick the phone up and it dials the number for them. That's the beauty of routing. 9 tells the system to use the PRI.

Joined: Mar 2011
Posts: 101
Member
Offline
Member
Joined: Mar 2011
Posts: 101
maybe you can set up destination code of (1 any)
delete none and insert none in the routing.
You may have to change the park prefix from 1 to something els.
worth a shot........

Joined: Feb 2005
Posts: 1,615
Member
Offline
Member
Joined: Feb 2005
Posts: 1,615
I think these are your only choices as mentioned above:

-Press Intercom then 9 and dial your #

-Program a button to dial 9 - this will save pressing Intercom then 9
Press the button then dial your number.

-Program Auto Dial (F*82)- this will save pressing Intercom.
Dial 9 and #

-Program a new Dest code of 8 and make it use a new route, make that route grab PRI same as existing route.
Program on set Hotline, External, pause, 8
Lift handset or use same way as Auto Dial and just start dialing your # from key pad.


=---()))))))))---=
www.curlycord.com
[Linked Image from telcopc.ca]
Toronto, Canada





Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,710 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
pvj 4
jc2it 4
Who's Online Now
1 members (justbill), 211 guests, and 241 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5