|
|
Joined: May 2001
Posts: 1
Member
|
OP
Member
Joined: May 2001
Posts: 1 |
I have a friend that has a KX1232 that was co-owned with his former business partner. After a less than cordial breakup, my friend wound up with the phone system. The local service rep was buddies with the former partner and is wanting to charge him $200 per hour to work on the system and set it up for his new business. Can anyone tell me how to reset the system to the default managers password of Program **1234? The old service provider will not tell them the password. Please help with this ugly situation.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2002
Posts: 43
Member
|
|
Member
Joined: Apr 2002
Posts: 43 |
piece of cake, reset the cabinet by turning it off, flip the reset/prog switch to reset, push the little button in and turn the unit on. release the button and before the power light stops flashing, put the program/reset switch back to prog. The power light should be solid. This resets the cabinet to default. Otherwise purchase the programator by DiMitri or Oleg and when you connect the software , and download the existing program, you can change the password then upload it to the switch. any q's...email me
The only dumb question is the one you don’t ask as that is the question that can make or break you. Brad
|
|
|
|
|
Joined: Apr 2002
Posts: 43
Member
|
|
Member
Joined: Apr 2002
Posts: 43 |
by the way, the default for the technician is NOT **1234 its *# 1234
The only dumb question is the one you don’t ask as that is the question that can make or break you. Brad
|
|
|
|
Forums84
Topics94,282
Posts638,762
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
72
guests, and
128
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
