|
|
Joined: Jun 2001
Posts: 3
Member
|
OP
Member
Joined: Jun 2001
Posts: 3 |
I cannot communicate with the TVS50 using Hyper terminal? I made the cable myself a checked and double checked it. When you boot up the TVS 50 you get the proper response on the hyper terminal screen but you cannot type anything it will not respond to key-strokes. I've double checked my port communications settings to no avail.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Double check your baud rate and make sure they match.
dtmf
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Nov 2004
Posts: 3
Member
|
|
Member
Joined: Nov 2004
Posts: 3 |
I realize your posting is years' old, but I'm having the exact same problem. What was your resolution; I receive info from my TVS50 w/no problems, but I appear to be unable to send any information to it.
Thanks,
PJS
|
|
|
|
|
Joined: Nov 2004
Posts: 3
Member
|
|
Member
Joined: Nov 2004
Posts: 3 |
After several hours, I've solved my own problem. It appears that it's necessary to set my Flow Control setting to "XON/XOFF" instead of "Hardware". This was never mentioned in the manual, but upon toggling such, I had immediate access to the TVS50.
PJS
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
155
guests, and
297
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
