|
|
|
|
Joined: Mar 2005
Posts: 14
Member
|
OP
Member
Joined: Mar 2005
Posts: 14 |
I have added a 4C0 module to the top position (3). I have checked and made the appropriate settings on program 109 and 400. The additional CO's (from the original 9 to 12) look to be recognized as they are 'available' in the Panasonic PC based program utility. I have cycled power for 10 minutes which has also done nothing. The CO's are available for assignment to the extension 'hot buttons' and allows me to assign... but when selecting after the fact the assigned button on any extension phone I get the same message of 'CO not assigned'. I have moved the 4CO to all 3 expansion slots and the problem still persists.
This is a 1232-5 unit.
Need some kind of suggestion as to what to check next.
------------------
Thanks much for any assitance provide.
Thanks much for any assitance provide.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
Swap those new COs with one on the main cabinet, 1-8 and see what happens. Also put one of the COs 1-8 on the 180 card and see what happens.
By default CO lines 9-12 are in Group 8.
press intercom 88 and see if you get a co line
on the card.
If not chek your outgoing assignments in 605 and 606
|
|
|
|
|
Joined: Apr 2005
Posts: 26
Member
|
|
Member
Joined: Apr 2005
Posts: 26 |
you have to go to line assignment 1 (or co connectprogram 400) and switch it to connect through the phone or y for yes through the pc
|
|
|
|
Forums84
Topics94,291
Posts638,821
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
