|
|
|
|
Joined: May 2005
Posts: 15
Member
|
OP
Member
Joined: May 2005
Posts: 15 |
I have a KX-TD816 TVS 75 setup with the KX-TD193 caller id board installed. CO's 2 and 4 show caller id. CO's 1 and 3 do not. I have enabled caller ID on all 4 CO's via programming function 406. The incomming CO's have caller ID enabled from the phone company and I have tried switching aroung the incomming lines to be sure . Besides a bad caller ID card is there something else I could have screwed up in programming? I am using the Russian Programming software "programmator version 1.23.23".
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
You shouldn't use the Russian programmator, it will corrupt your programming. You may create more problems while programming with that software.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
DTMF is correct, that programmator has been known to cause some strange problems.
Go in through a display set off port 1 and check program 406 there. Just enter * and enable and press store.
Also it would be a good idea to reset the system after you do this.
|
|
|
|
|
Joined: May 2005
Posts: 15
Member
|
|
OP
Member
Joined: May 2005
Posts: 15 |
<font face="Verdana, Arial" size="2">Originally posted by MrGemini:
DTMF is correct, that programmator has been known to cause some strange problems.
Go in through a display set off port 1 and check program 406 there. Just enter * and enable and press store.
Also it would be a good idea to reset the system after you do this.</font> You were right. I had to do a master clear and reset to get all 4 caller ID channels to work. Thanks!
|
|
|
|
Forums84
Topics94,292
Posts638,824
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
