sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems tvs-50 voice mail, intercept help needed

Is it possible to intercept more than CO-1 with TVS-50 and a KX-TA1232

I also need to intercept CO-3 and CO-5 so the Out Going Message plays on all three when someone calls those 3 numbers.


I'm a Computer Tech - HELP ME PLEASE !

lol

You can set your "IRNA" on all the lines if you want. The program is simular to that of he digital 1232 and I believe that TA 1232 supported DPITS integration with a TVS unit.
Check out program fields 409 day and 410 night.
Are you saying that you do not want CO lines 2 & 4 to be answered by the A/A ?

MrGemini,

Hello, thanks for your help !!!

Well heres the setup that they want:
CO-2 hunts to CO-1, CO-4 hunts to CO-3 and CO-6 hunts to CO-5.

They want the OGM from the VPS to work with CO-1, CO-3 and CO-5.

If it's possible ?

TIA

fonetec

So you have 3 groups of 2 CO lines each.
If CO lines 1, 3, and 5 ring do you want the A/A to answer immediatly or after 3 or 4 rings.
Are you familiar with the programming, if not you should call a Tech.
You do know the pilot Ext. for the A/A, right.
It's probably 165.
If you want those lines answered immediatly by the A/A set up DIL 1-1 407 day, 408 night to go to 165, (or what evr the pilot Ext. is)
If you want a line to ring 3 or 4 times before the A/A answers it then set up your IRNA in fields 409 day and 410 night to the pilot port.

the pilot ext. is 165

[CO lines 1, 3, and 5 ring do you want the A/A to answer immediatly or after 3 or 4 rings.]

Yes I want 1,3 and 5 answer by the auto att. 24 -7 after 3 to 4 rings

And I understand the programing some what enough to get by.

What sys programs numbers do I use to that, 409 and 410 ?

Or do you have enable it for all lines ?

fonetec

[This message has been edited by fonetec (edited May 28, 2005).]

Let me ask you something can the TVS-50 answer two or three lines at the same time

fonetec

Only 2 as it only a 2 port unit.

Is the pilot ext. 165 for both ports

If you set it up by entering the TA1232 port that the TVS 50 is on into program 117 then your pilot port should be 165 and the 2nd port would be 166