| Joined: Sep 2007 Posts: 16 Member | OP Member Joined: Sep 2007 Posts: 16 | TD1232 V3 has been shut down and power cord unplugged for some time. Recently the building was bought and I powered up the system. The phones produce a high pitch whining noise. I cleared the programming and still get the same issue. I also unplugged all additional cards and still have the same issue. The phones do not respond to any actions or buttons.
Jason | | | | Joined: Jan 2007 Posts: 2,082 Likes: 1 Admin | Admin Joined: Jan 2007 Posts: 2,082 Likes: 1 | It sounds like the Crystal on the plu card, it runs the digital ports, if you plug in a standard telephone in the center pairs does that work
“I have not failed. I've just found 10,000 ways that won't work.”
| | | | Joined: Sep 2007 Posts: 16 Member | OP Member Joined: Sep 2007 Posts: 16 | Customer shipped it to the repair center this afternoon. | | | Forums95 Topics94,281 Posts639,023 Members49,425 | Most Online5,661 May 23rd, 2018 | |
32 members (Yoda, Ruben, hbiss, Steve Layton, Touch Tone Tommy, nonameyet, joshuacook, Iwatsu Guru, barnito, justbill, dexman, High Mesa Communications, KRRath, Harry76, Professor Shadow, nortelvoip, Daniel, Canteleco, jknichols, Biztel Cuban Okie Tech, mongo5150, vicbob, BJW86, HutchComm, MooreTel, metelcom, BobRobert, Carl Navarro, FoneJacker, Skunky, sundance, EV607797),
509
guests, and
39
robots. | Key: Admin,
Global Mod,
Mod | | | |