|
|
|
|
Joined: Nov 2007
Posts: 47
Member
|
|
Member
Joined: Nov 2007
Posts: 47 |
We have a site where when a call has been transferred, the call is often cut off after a minute or so. This does not happen if the call is answered directly and is happening accross all extns. Any suggestions ??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
W A-Kid, are you saying that it only happens when the call is transfered from an auto-attendant?
------------------
MrG
|
|
|
|
|
Joined: Nov 2007
Posts: 47
Member
|
|
Member
Joined: Nov 2007
Posts: 47 |
No, the call is answered by a user and then transfered
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
Try turning off no dial connection in prog 211. Have seen problems when call transfered, not held is droped and then picked up again and the system will drop the line because it thinks you are making a outgoing call but when it does not see any digits being dialed it drops the line.
To Prevent this make sure all calls are transfered the same, if one person is holding and announcing the call on line 1, the person may hang up and press line 1 flashing. if someone else is using transfer or R button and when they hang up the call is put through,but the person reciving the call hangs up and then press the line button,they will get the call ok but the system thinks you hung up and now you are making a outgoing call,but drops the line because it does not see any digits being dialed.
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: Nov 2007
Posts: 47
Member
|
|
Member
Joined: Nov 2007
Posts: 47 |
When the call comes in the receptionist answers, she then presses the transfer key and announces the call to the other extn. After the extn answers, the call lasts a short time and then is lost. The extn then has to hit the line key the call came in on because the caller is still there. This only happens when a call is transferred to another extn. ??
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
Turn off the no dial detect in prog 211 it should solve the problem, but it sounds like something happening in the transfer process. the only way to see what’s happening is observe the receptionist transferring the calls and also watch the person receiving the call( this is better done if you can without them knowing you are watching, as they will be extra careful if they know) and watch the line lights.
Or else use hold and see if the calls still drop
.
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
Forums84
Topics94,513
Posts639,937
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
208
guests, and
46
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
