CO Line assignment|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Page 1 of 2

CO Line assignment #164640 07/13/09 11:24 AM
Joined: Feb 2009 Posts: 20 California drobertscor OP Member
OP drobertscor Member Joined: Feb 2009 Posts: 20 California	I have a KX-T1232D unit. I would like to understand how the "Jacks", "extensions" and "CO's" all tie together. Hear is my issue. CO-3 is not active through the PBX. It is wired in like the other CO lines but on the output side none of the jacks have the CO-3 number on it. I am guessing somewhere in the configuration it has been omitted. All the jacks/ext's seem to be in line ext 101 is the console phone which is jack 01-1 and so on. How do i activate CO-3 again? I believe it will have to be the next available jack/ext but don't know how to config/assign it. Don Roberts

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: CO Line assignment #164641 07/13/09 01:44 PM
Joined: Jan 2007 Posts: 1,026 kevhawk13 Member
kevhawk13 Member Joined: Jan 2007 Posts: 1,026	There are two things that must be done for CO-3 to work. In system programming, (pgm 400) the line must be enabled (or connected) and (pgm 605-606) the stations (jacks which correspond to extensions) must be given access to CO-3.

Re: CO Line assignment #164642 07/31/09 01:09 PM
Joined: Feb 2009 Posts: 20 California drobertscor OP Member
OP drobertscor Member Joined: Feb 2009 Posts: 20 California	My pbx is actually a KX-T123211D, does the same apply? Don Roberts

Re: CO Line assignment #164643 07/31/09 06:11 PM
Joined: Jan 2007 Posts: 1,026 kevhawk13 Member
kevhawk13 Member Joined: Jan 2007 Posts: 1,026	Yes. However, the T123211D is so old that I'm not sure if the program number is the same. In fact,I'm pretty sure that the programming numbers would be more like the old 616 (someone will correct me if I'm wrong...

Re: CO Line assignment #164644 07/31/09 07:29 PM
Joined: Feb 2009 Posts: 20 California drobertscor OP Member
OP drobertscor Member Joined: Feb 2009 Posts: 20 California	I have a full system dump. Is there a way to post for you to look at? All 12 CO's are enabled, CO-3 works on the console set. Don Roberts

Re: CO Line assignment #164645 08/01/09 01:41 AM
Joined: Oct 2001 Posts: 4,043 US MrGemini Member
MrGemini Member Joined: Oct 2001 Posts: 4,043 US	Don, that old analog system programming is completely different then the digital fields Kev gave you above. The fact that all 12 are enabled should be in field 40. (you can change that to the proper amount of CO lines that you actually have if you like) You have to assign the CO line ringing and out calling privileges on a per extension basis. Out dialing day is field 45, night is 46 Ringing day is 47, night is 48 ----------------------------- MrG

Re: CO Line assignment #164647 08/01/09 05:16 AM
Joined: Dec 2004 Posts: 5,722 KS KLD Member
KLD Member Joined: Dec 2004 Posts: 5,722 KS	Did you program CO 3 for the set via telephone? Did you allow it as a button on that set? Just because you can access it via computer doesn't really mean a lot....program by set works better. Good luck. Ken ---------

Re: CO Line assignment #164648 08/01/09 07:27 AM
Joined: Oct 2001 Posts: 4,043 US MrGemini Member
MrGemini Member Joined: Oct 2001 Posts: 4,043 US	That's quite a dump you got there Don. Everything seems to be set properly. Did you try dialing intercom 8 3 and see if you can access CO 3 that way? ------------------------------------------ MrG

Re: CO Line assignment #164649 08/02/09 08:11 AM
Joined: Jun 2005 Posts: 574 england Gerrya Member
Gerrya Member Joined: Jun 2005 Posts: 574 england	Long time since i seen or done a dump like that in programing looks like co3 is enable to all telephones as mr g says try 83 as this the code to call line 3

Page 1 of 2

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems CO Line assignment