|
|
|
|
Joined: May 2009
Posts: 8
Member
|
|
Member
Joined: May 2009
Posts: 8 |
I recentyly aquired a customer that has this system. Fixed all of the problems except it seems one or more of his CSs aren't functioning. I have done some reading since leaving the site. It appears all you should have to do is make sure the switches are off and it is connected to a working port. I don't know about the switches the port is good because I can plug in a keyset and it works. I know there is programming for the PS. But I didn't see any applying to the CS. Is this correct. Any help with this will be appreciated. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 1,217
Member
|
|
Member
Joined: Jan 2007
Posts: 1,217 |
The cell site has to be plugged into the built in 4 port extension card, it cannot be plugged into any plc cards. The 848 system is limited to 4 cell sites.
Also try swapping cell sites, may be a bad unit.
Aaron
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
