|
|
Joined: Nov 2009
Posts: 34
Member
|
OP
Member
Joined: Nov 2009
Posts: 34 |
We are trying to add 2 lines to this system. Lines 1-3 are dial tone, and line 6 is connected to a paging system. We connected COs to lines 4 and 5, programmed them as connect in 03, changed the ringing assignment in 09,10 and checked that the buttons are programmed on the extensions by going into the program mode on the phones but we still can not pickup lines 4 or 5 on the system or get ringing in on them. When pressed the buttons give a reorder tone.
|
|
|
|
|
Joined: Nov 2009
Posts: 34
Member
|
|
OP
Member
Joined: Nov 2009
Posts: 34 |
We found the answer in 07 and 08. Problem fixed. Not certain why it wouldn't ring in before those were programmed though. everything worked after activating the lines there.
|
|
|
|
Forums84
Topics93,879
Posts637,001
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
93
guests, and
17
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
