|
|
Joined: Feb 2006
Posts: 1,716
Member
|
OP
Member
Joined: Feb 2006
Posts: 1,716 |
OK, I'm a dyed-in-the wool Mitel tech. What I know about Panasonic would fill a thimble. However, our company got Shanghai'd into installing a NCP 1000 and a TVA 50. I figured out how to get the PBX working, however, I can't get the voice mail registered. I am using a 16 circuit DLP module and the TVA is equipped with one, 2-jack line input, which is supposed to be DLP and is on the motherboard. I called Panasonic tech support and the tech there told me to disable the 16 circuit DLP module and then, using the PC program, change the port type to voice mail. Well, that didn't work. What a waste of $90.
Does anyone know how to get the VM registered? I defaulted the VM as per installation instructions, set it for VM only and then returned the switches to 0000. All I have is a blinking green light.
One other situation is a cordless phone that won't register either. Any suggestions?
Rcaman
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
that's about it . Set up a port that is set to VM.
Program the TVA for DPITS integration and in should connect up. Then run auto configure.
|
|
|
|
|
Joined: May 2004
Posts: 324
Member
|
|
Member
Joined: May 2004
Posts: 324 |
i take it you dont have the software for the voicemail system
peter
|
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
|
OP
Member
Joined: Feb 2006
Posts: 1,716 |
I have software for both. When I disable the DLP module, the area when I am supposed to make changes is gray and I can't make changes. I have set the VM to DLP integration.
Rcaman
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
I'm unfamilar with a DLP module. Do you mean DLC?
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
|
OP
Member
Joined: Feb 2006
Posts: 1,716 |
I finally got the VM to work. I was given bad advice from the Panasonic tech. When setting the ports for VM, there is a menu choice on the same window that OUS is located which allows port changes to be made when the module is OUS.
Thank you all for your posts.
Rcaman
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
|
|
Joined: May 2004
Posts: 324
Member
|
|
Member
Joined: May 2004
Posts: 324 |
i dont think it was bad advice just a miss understanding if i was talking to panasonic and the told me to disable the 16 port DLC card. to me it would mean put the card to OUS.
Let us know if you have any further issues
Peter
|
|
|
|
Forums84
Topics93,969
Posts637,428
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
