sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Panasonic Telephones & Systems kx-t1232d

Not td1232 or even ta1232 (that looked like the td) but the old beige beast. How do you change the time? Can't find the manual. I know on the 61610, you flip a switch on the KSU then go to ext 10, is it the same? If so, where's the switch? A link would be great.

Thanks...

This is the procedure for setting time at ext101 without putting the system into programming mode.:
At jack 01 with handset in cradle and SP-PHONE off.
Set MEMORY switch on the phone to PROGRAM
Dial 0
Enter the year (last 2 digits)
Enter the month (2 digits)
Enter the day ( 2 digits 01 -31)
Enter the day of the week ( 0-6 with 0 being Sunday, 1 Monday...)
Enter the hour ( 2 digits 01 - 12)
Enter the minutes ( 00-59)
Dial 0 for AM or 1 for PM
Press the MEMORY button
Return the MEMORY switch back to SET position

I can lookup the phone system procedure if you like also but know it's program number 00.

If this works this is alot better than flipping the switch on the KSU. I think this guy has a 7731 at x101, I'm asuming that the Program button and Store button take place of switching the program switch on the phone and the memory button. I'll be calling them to walk them through it today.

Thanks

I'm not sure about the phone, I've only used the 7130, 7030 display sets on that system. I didn't think the 7731's worked on it?
By the way, the KSU has a Program switch on the left side of the cabinet if you need to get into system programming.
Good luck.