sundance-communications.com/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems KX- TD500

Hi,
This is my first time here. Does anybody know how big of UPS do I need to order for a KX-TD500 with all 3 Cabinets full with DHLC, DLC,and T1 cards.

The system is completely full. I need a Ups that will keep it running for 2 mimutes. Any help would be appreciated.

Thanks

"first time here", yet with posts dating back to January 2010 :shrug: :bang:

Try a manufacturer's web site who'll have a calculator, like www.apc.com

Aw, c'mon Dave, cut the kid some slack. Actually, I guess you did, giving him the link we all use! I think he means it's his first t1me in the Panasonic forum.

The following power consumption are measured on a static condition.
Power Consumption
Shelf TD500 Basic Shelf (CUP/TSW only) No optional Cards. 12 W
TD520 Expansion Shelf (Without any option) 2W
Extension Cards TD50170 DHLC (Digital Hybrid Line Circuit) Card (8 Port) 2W
TD50172 DLC (Digital Proprietary ITS Line Circuit) Card (16 x PITS) 3W
TD50175 ESLC (Enlarged-Single Line Telephone Circuit with Message Waiting) Card (16 x SLT) 25W
T96170 HLC (Analog Hybrid Line Circuit) Card (8 Port) 2W
T96172 PLC (Analog Proprietary ITS Line Circuit) Card (8 Port) 2W
T96174 SLC (Single Line Telephone Circuit without Message Waiting) Card (8 x SLT) 2W
T96175 M_SLC (Single Line Telephone Circuit with Message Waiting) Card (8 x SLT) 14W
Trunk
Card TD50180 ELCOT(Enhanced Loop Start Central Office Trunk) Card (8CO) 6W
TD50288 BRI Card ( 8 BRI=16 CO) 3W (21W *1)
TD50290 IPRI Card (1 PRI=30 CO) 2W
T96180 LCOT (8 CO) 6W
T96182 Analog DID (4 Port) 2W
T96183 RLCOT (8 CO) 2W
T96184 E&M Card (4 E&M Line) 2W
T96188 E-1 Trunk Card (1 E1=30 CO) 12W
T96189 PCOT + Pay tone (4 Port) 2W
Resource Card TD50197 ERMT(Enhanced Remote Circuit) Card 2W
T96191 DISA(Direct Inward System Access) Card 2W
T96193 AGC Card 2W
T96196 RMT (1200bps) 2W
Others T96161 DPH (Doorphone Circuit) Card 2W
TD193 Caller ID Card (4ports/Card) 1W
TD50104 TSW-CONF (Conference Expansion) Card 1W
TD50105 DOHCA (OHCA for Digital Telephone) Card 1W
TD50189 Pay Tone Card (4ports/Card) 1W
T30865 Doorphone 0.5W
Telephone SLT 0.5W
A-PITS B: 80 % LED are "ON" and speaker hone is used. (Based on T7030) 2W
D-PITS B: 80 % LED are "ON" and speaker hone is used. (Based on T7230) 2.5W
A-PITS B: Standby power consumption of T7030 0.5W
D-PITS B: Standby power consumption of T7230 1W
*1) Feeding ISDN internal DC power.

Calculation sample
Configuration
TD500 12W
TD50170 (DHLC) x 3 6W (2W x 3)
TD50172 (DLC) x 2 6W (3W x 2)
TD50288 (BRI) x 2 6W (3W x 2)
TD50290 (PRI) x1 2W
TD50197 (ERMT) x 1 2W
T96191 (DISA) x 2 4W (2W x 2)
T96161 (DPH) x 1 2W
T30865 (D-Phone) x 2 1 W (0.5W x 2)
SLT x 20 10W (0.5W x 20)
D-PITS x 40 100W (2.5W x 40)
Total 151 W

You need a gentran & backup generator

Thank you for the information on the power consumption. That will help a lot. This is my first t1me in the Panasonic forum.

Thanks again for the help.

Can we ask c'mon Dave to be more gentle and not too quick to judge?

Asking a phone 'Jedi'.......Will a Panasonic KXT7740 DSS work in conjuction with a KXT7736 Dispaly set? If so, Do I need to complete any additional programming in the KXTDA-50 system? Any info would help this 'Padawan'.

Start a new post next time!