|
|
|
|
Joined: Dec 2008
Posts: 47
Member
|
|
Member
Joined: Dec 2008
Posts: 47 |
Question: If i have a tva 50 or a 200 and forget to mess with the dip switches on the side, Will i loose all of the info i have programmed into it as soon as it loses power. (This is a newer unit.)
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 1,217
Member
|
|
Member
Joined: Jan 2007
Posts: 1,217 |
No, out of the factory the dip switches are set to normal mode.
Aaron
|
|
|
|
|
Joined: Dec 2008
Posts: 47
Member
|
|
Member
Joined: Dec 2008
Posts: 47 |
Okay so i should be good then right?
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
92astro is correct. But when you get a new TVA you have to initalize it via dip switches by powering down put the switches in the initalize position then power up. After the initalizing, power down again and move the switches back to the factory default and power up. If you leave the switches in initalize and lose power you will lose all programming.
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Dec 2008
Posts: 47
Member
|
|
Member
Joined: Dec 2008
Posts: 47 |
What if i never moved or touched the swithches?
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
If this an up and running TVA that has been installed already don't worry about the switches.
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Dec 2008
Posts: 47
Member
|
|
Member
Joined: Dec 2008
Posts: 47 |
Okay thank you, I just did not want it to have issues, Later but if you think it is fine then i wont mess with it. What do you think?
|
|
|
|
|
Joined: Jan 2007
Posts: 1,217
Member
|
|
Member
Joined: Jan 2007
Posts: 1,217 |
Look in the install manual, it tells you how the dip switches should be for normal mode, initialize etc...
But I wouldn't worry about it too much.
Aaron
|
|
|
|
|
Joined: Jan 2007
Posts: 2,125 Likes: 4
Admin
|
|
Admin
Joined: Jan 2007
Posts: 2,125 Likes: 4 |
if you left any switches on, the run light would be flashing to a sequence for that combo
“I have not failed. I've just found 10,000 ways that won't work.”
|
|
|
|
|
Joined: Dec 2008
Posts: 47
Member
|
|
Member
Joined: Dec 2008
Posts: 47 |
Okay thank you for the help
|
|
|
|
Forums84
Topics94,522
Posts639,999
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
224
guests, and
56
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
