sundance-communications.com/forum Forums Other TDM Phone Systems Telrad Telephones & Systems Imagen

Hello, i have a telrad keybx and imagen vm. came out of a small office that we closed and i inherited for keeps. I don't know how to program this puppy so looking for advise.. When i power up the vm i get menus and then i choose and bam a password,,, what is it.. i have no idea and it is just for me to train on. so can anyone help. thanks in advance,,

Put an email address in your profiles and I'll send the default password to ya.

I am assuming you are talking about a Digital Keybx, you need a laptop or PC and the ver software to program the system with a cable plugged into the RJ45 port on the MPD.
To get into the voice mail use the default password that test-ok sends you,it my have been changed. Being that it came out of one of your offices you may want to get with the old office manager to see what the password is if it has been changed, or maybe even the people who serviced it. As far as the Telrad system goes any one of us Telrad moderators can get you into it.
The first thing you need to do is get a program kit, www.tel-programmer.com or www.oneringtelecom.com both have them, first you need to get your system ver. off of the Memory Cartridge attached to the MPD they will need to know what it is to get you the right ver. software.



[This message has been edited by dtmf (edited October 27, 2003).]

Test-OK i have an email address in my profile now thanks.

you have mail.

On this system invoice that i have it shows that it is a S860 but i only find S60 does that sound like a typo.

Well it could be..not seeing the invoice. An S60 is a digital single 6 slot cabinet.
S860 could mean SB 6.* for the software version...But my bet is S60.
hope that helps.