|
Joined: Sep 2004
Posts: 3
Member
|
OP
Member
Joined: Sep 2004
Posts: 3 |
Trying to network a Telrad (v6.xx) and Asterisk (TE110P) I know that Telrad does not do Pri Point to Point with out one side acting like a co. Can the Asterisk do this
|
|
|
|
Joined: May 2005
Posts: 56
Member
|
Member
Joined: May 2005
Posts: 56 |
Why use a pri to network them? A point to point clear channel t-1 could network the 2 systems without the hassle of figuring out how to make a PRI card in the telrad function outside it's normal use. I don't think the n12/n24 cards will work in a v6.xx but I know you can network with t-1 cards and setup the trunks as e&m tie lines. Actually, after looking at your part (TE110P) it is a T-1 card, so that makes the ptp t-1 networking perfect for your existing asterisk hardware. I don't know how much functionality you can get between a telrad and an asterisk beyond passing calls, but I'd love to hear if you can send mwi and blf somehow.
|
|
|
|
Joined: Sep 2004
Posts: 3
Member
|
OP
Member
Joined: Sep 2004
Posts: 3 |
The reason for PRI versus T1 is I have an extra PRI card, and do not have an extra T1 (Which would be easier I know)
[This message has been edited by paulschase (edited June 28, 2005).]
|
|
|
Forums84
Topics93,879
Posts636,998
Members49,673
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Yoda, mongo5150),
17
guests, and
18
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|