|
|
|
|
Joined: Sep 2004
Posts: 3
Member
|
|
Member
Joined: Sep 2004
Posts: 3 |
Trying to network a Telrad (v6.xx) and Asterisk (TE110P) I know that Telrad does not do Pri Point to Point with out one side acting like a co. Can the Asterisk do this
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 56
Member
|
|
Member
Joined: May 2005
Posts: 56 |
Why use a pri to network them? A point to point clear channel t-1 could network the 2 systems without the hassle of figuring out how to make a PRI card in the telrad function outside it's normal use. I don't think the n12/n24 cards will work in a v6.xx but I know you can network with t-1 cards and setup the trunks as e&m tie lines. Actually, after looking at your part (TE110P) it is a T-1 card, so that makes the ptp t-1 networking perfect for your existing asterisk hardware. I don't know how much functionality you can get between a telrad and an asterisk beyond passing calls, but I'd love to hear if you can send mwi and blf somehow.
|
|
|
|
|
Joined: Sep 2004
Posts: 3
Member
|
|
Member
Joined: Sep 2004
Posts: 3 |
The reason for PRI versus T1 is I have an extra PRI card, and do not have an extra T1 (Which would be easier I know)
[This message has been edited by paulschase (edited June 28, 2005).]
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
292
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
