sundance-communications.com/forum Forums Other TDM Phone Systems Telrad Telephones & Systems Avanti 3000D, can't accept incoming call

Hello! I have one problem.
I don't know what happend, but my avanti 3000D can't accept any call from inside. From outside - is ok.
For example, when somebody dial my internal number - hear two short and one long tone, and next busy tone.
Before this i do some experiment with call forwarding, via {Feature},{35},{4},{Phone Number}.
Next, i remove call forwarding via # {Feature},{35},{4}.
May be i do something wrong and in result i have problem.

Looks like you answered your own question, take all forwarding off and see if it doesn't come back to life.

Looks like...
May be i press some buttons and something happend with my phone..I dont't know. DND-is disable.
What else?

I try to move my 3000D to another extension. For example was ext. 4011, i reconnect to 4014. But anyway i can't accept internal calls.

May be need reset the phone? Are there any service code for resetting to default my phone?

So your saying the problem follows the set no matter what port you use, then there is your problem.

What i need to do??

Call a display phone from that phone and make sure you have the right EXT number. If the phone is a display, just unplug it and when it initizatilizes (I CAN'T SPELL)it will say DN is XXX. That's the EXT Number. I got a feeling you have the wrong EXT number. There are no problems with internal calling that I know of and I've never seen that problem. Unless you have ICM restriction set up. Witch isn't used too offen or even at all!