Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
#175419 11/18/08 01:51 PM
Joined: Nov 2007
Posts: 44
rlmentz Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 44
Is it possible to assign a 4 button set as an attendant? Or at least assign a night button to a regular extension. Seems like i have tried this in the past and it must be an ATT phone for the night to work.

Atcom VoIP Demo
Get a VoIP Demo Today
#175420 11/18/08 02:39 PM
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
Yes. But you have to make it an answering position. I wouldn't suggest a 4-button set. I would at use a 16-button set. Reason being is because it not easy to take multiple calls on a 4-button set.

#175421 11/18/08 02:51 PM
Joined: Nov 2007
Posts: 44
rlmentz Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 44
Tony,
Thanks for the reply. To be honest, the att phone only servers the purpose to change the system into night mode. There is nobody that uses the phone otherwise. I am short of EX sets, and this is just a wasted phone. I have a 4 button phone that would serve as the attendant. Unless I can assign a night button to a regular position. I just finished trying, but after assigning NG to a button, it did nothing.

#175422 11/18/08 02:58 PM
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
Version of the system? you can assign the night key to any EXT you want.

#175423 11/18/08 03:25 PM
Joined: Nov 2007
Posts: 44
rlmentz Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 44
I believe its 7.22, without taking it out of the cabinet. telrad digital phones.

#175424 11/18/08 03:44 PM
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
You can check for the programming software.

But that’s ok for now.

You need to deprogram the ATT 1st in the ATT-1 Colum. Then reassign any EXT you want in the Answering Position Colum for ATT-1. Just make sure for trunks are assign to the proper ATT in private trunk features or DID Routing. Then put a NG button on that answering position set. You will probably have to make a new MAP for that EXT.

#175425 11/18/08 03:54 PM
Joined: Nov 2007
Posts: 44
rlmentz Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 44
Tony, thats exactly what i did, and it worked. After reading your first post about making it an answering position, I couldnt figure out what you were talking about. Messing around in the attendant setting screen, i saw the answering position and after trial and error finally got the attendant position to take the 4 button phone. Thanks so much for all your help. One quick question, does the system only allow one phone to have the NG assigned to it?

#175426 11/18/08 04:15 PM
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
Yes and No. You can have only one night key for each trunk. You can have four ATT. But only one ATT can control night service for each trunk. You can assign diffrent ATT for diffrent Trunks. Hope that make since.

#175427 11/19/08 05:57 AM
Joined: Nov 2007
Posts: 44
rlmentz Offline OP
Member
OP Offline
Member
Joined: Nov 2007
Posts: 44
Trunks being the incoming lines correct? Grouped by a trunk DN (our case, 9 for outside lines).

#175428 11/19/08 10:47 AM
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
Offline
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281
Yes outside lines.


Moderated by  SSPhone 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,639
Posts635,913
Members49,591
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
There are no members with birthdays on this day.
Newest Members
INFORMACOM, TVCTech, joe angi, TommyKay, 電信小吳
49,590 Registered Users
Top Posters(30 Days)
dexman 8
Toner 7
dans 6
Yoda 6
Who's Online Now
1 members (Yoda), 29 guests, and 12 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5