|
|
|
|
Joined: Apr 2003
Posts: 14
Member
|
|
Member
Joined: Apr 2003
Posts: 14 |
Need to add phone to DK40i system. Currently 8 phones with 4 CO lines. Have 2 new COs from Bell that need to be added to all phones. New phone currently has intercom capabilities but I haven't been able to add existing CO lines. What programs do I use to add these new lines? Thank you in advance for your help.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2003
Posts: 14
Member
|
|
Member
Joined: Apr 2003
Posts: 14 |
Additional info: I am a systems administrator for local hospital system. I am more familiar working with a ROLM 9751 CBX. One of our new offices has a Toshiba Strata DK40, and I have been given the job of learning and maintaining it. I bought the Toshiba manuals but I have not been able to figure out how to add this new phone and to add the 2 new lines to the existing phones. I do have 20 button phones throught he facility and I have identified the port numbers. Any help would be appreciated.
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
i have to assume you have already connected
the dk to the co,s. you will use program,s 39 (for line appearance)and 81-89 for ringing. if you are really scratching your head at this point. call your local toshiba guy you will be glad you did. toshiba proging can be quirky for some people. if you are not in deep shit crimp some mod ends for you co,s and you should be in bidness.
good luck
[This message has been edited by martin (edited April 26, 2003).]
|
|
|
|
|
Joined: Apr 2003
Posts: 21
Member
|
|
Member
Joined: Apr 2003
Posts: 21 |
the base 40i configures 4x8
do you have an expansion cabinet on there???
|
|
|
|
|
Joined: Apr 2003
Posts: 14
Member
|
|
Member
Joined: Apr 2003
Posts: 14 |
I do have an expansion cabinet installed with 1 card, I think a DCKU? Something like that.
|
|
|
|
|
Joined: Apr 2003
Posts: 14
Member
|
|
Member
Joined: Apr 2003
Posts: 14 |
Martin - Thanks for your reply. Would you mind explaining "crimp some mod ends for your co's" further. If I can't figure this out, do you know of a Toshiba tech in the Greenville, SC area? Thanks.
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
i am refering to the connection you must make between your demarc and co3&4 in your switch. hopefully the installer wired that for you and you only need jumpers. lookin the installers link on sundance at the bottom of this page to see if you have a participating company near you
[This message has been edited by martin (edited April 27, 2003).]
|
|
|
|
|
Joined: Apr 2003
Posts: 14
Member
|
|
Member
Joined: Apr 2003
Posts: 14 |
Thank you for your advice and help. Where could I acquire a key for LPT port to use with DKAdmin software? Thanks in advance for reply.
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
factory authorized toshiba dealers have this in their catalogs. maybe in THE MART.
you will also need a tsiu card.
if you are managing a small system sometimes it's not woth the expense. you can do all of the programming on any extension
[This message has been edited by martin (edited April 27, 2003).]
|
|
|
|
Forums84
Topics94,518
Posts639,973
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
3 members (utec, justbill, Skunky),
226
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
