|
|
|
|
Joined: Jun 2003
Posts: 6
Member
|
|
Member
Joined: Jun 2003
Posts: 6 |
Hi all, first off thanks for a great board. I have learnt a lot from you guys! Oh & hello from London. A little advise please while we wait for tecs to sort this out.
Today our isdn30 lines went down. Every handset lit up like xmas decorations, ho hoo hooo. Outgoing lines sounded engaged, dialing our number did not give any indication that we were on this earth, no tones or ringing. Telecom duly arrived and after checking their kit said that their fibre cable must have been severed! So we are currently awaiting "outside contractors" to find the fault & make repairs.
The engineer turned Strata off at the power supply (in the cabinet) & on again, the only light now on at the handsets is line 1. Before switching off I was able to access the program modes. Now all phones inc. 005 are dead eg. no response to any button tones or otherwise also no lcd information even on 005. So I am unable to access anything & we can`t even use dk280 to intercom.
It appears that there are no pstn lines connected (how stupid) so we are dead all but for the dedicated fax lines. So we have gone from 92 down to 2 lines.
I thought that after shut down (about 5 secs) that the system should have come back up to at least program mode? is there a way to get dk280 useable internally before the isdn30 come back on? or is it waiting until it sees live lines at the switcher?
Any advise will be very much appreciated. By the way I did ring a couple of companies about this but could not get to speak to an engineer so thought I would run this by you all.
Many thanks in advance
Brian
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
your system should come up after a shutdown.
have you looked at the cabinet? maybe someone
left the power off? you might check the power supply in the top cabinet.
|
|
|
|
|
Joined: Jun 2003
Posts: 6
Member
|
|
Member
Joined: Jun 2003
Posts: 6 |
Hi again, we lost our lines for 24hrs! The system came up after I powered it down & up again. All our lines came back up, 5 mins later telecom rang to inform us that they had repaired the fault. It was just strange that we had nothing at all, eg we could not even intercom?
Thanks anyway
Brian
|
|
|
|
Forums84
Topics94,526
Posts640,014
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
220
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
