|
|
Joined: Jun 2003
Posts: 41
Member
|
OP
Member
Joined: Jun 2003
Posts: 41 |
I have a Toshiba Strata DK40i. I need to change my station numbers from 2 to 3 digits but am having problems. I assigned 3 digit numbers to the stations in program 04, (like 600), but when I dial it the system says station 60 is vacant.
I assume that there must be a system setting somewhere in the manual to change the digit length from 2 to 3 but I can't find it anywhere.
Rich
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
Member
Joined: Mar 2001
Posts: 581 |
three number dn,s were default so run 91-1 600 may be reserved for a pilot or something though m also your port numbers may be different if they were changed from default. use the distributed hunt group for vm. after saying all that i still don't know why 04 doesn,t work. try a lower number 225 and see if it takes m
[This message has been edited by martin (edited April 29, 2004).]
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Make sure the extensions are not duplicated in prog *04
[This message has been edited by phonemeister (edited April 30, 2004).]
|
|
|
|
Joined: May 2004
Posts: 4
Member
|
Member
Joined: May 2004
Posts: 4 |
check all the ext nummbers in the system you might another port or a phantom ext programmed as 60
|
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
|
Most Online5,661 May 23rd, 2018
|
|
1 members (JBean3329),
142
guests, and
230
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|