Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jun 2004
Posts: 10
Member
OP Offline
Member
Joined: Jun 2004
Posts: 10
I have hooked up a FAX machine on an analog line and it does not dial out. I tried with a standard phone instrument and hear dial tone but it does not break when I push DTMF keys.
This system was installed 18 months ago by another agency. Then this summer our agency bought the building, including the DK424i phone system. I do not see any indication that they used the analog lines before, but the system has the RSTU and the BRCS4 board plugged onto the PCB in the second slot.
Since I do not have spare boards, how can I determine that the BRCS4 board is working? I have checked program 03 and the slot 000 is set to 91 and the 001 is set to 92.
That seems to be what would make it operate.

Atcom VoIP Demo
VoIP Demo
Joined: Jul 2004
Posts: 17
Member
Offline
Member
Joined: Jul 2004
Posts: 17
Move the BRCU to the other processor

Joined: Jun 2004
Posts: 78
Member
Offline
Member
Joined: Jun 2004
Posts: 78
phnman is right....check 03 again and rock the power


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,884
Posts637,026
Members49,675
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
-=SoCal_Ender=-, Bill Cooper, Bill Shufflebarger, Capt. Canwrench, windsor exports
Newest Members
tech3500, APInc, m1cashman, jonnycom, XJR9000
49,674 Registered Users
Top Posters(30 Days)
Toner 9
jsaad 8
teleco 6
Shahza 4
dexman 4
Who's Online Now
0 members (), 110 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5