|
Joined: Mar 2005
Posts: 3
Member
|
OP
Member
Joined: Mar 2005
Posts: 3 |
Any one know where I can a programming manual. I got thrown this system and need to install and program it.
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
there is a manual link above on this page manuals plus is good
[This message has been edited by KENB (edited March 23, 2005).]
|
|
|
|
Joined: May 2003
Posts: 2,267
Member
|
Member
Joined: May 2003
Posts: 2,267 |
I hate to be negative, but if you have never installed/programmed a Toshiba system, you are getting in way over your head. Toshibas are not easy systems to program. ------------------ Avaya Telephone Repair Toshiba Telephone Repair
|
|
|
|
Joined: Mar 2005
Posts: 3
Member
|
OP
Member
Joined: Mar 2005
Posts: 3 |
Ive never programmed on a toshiba but I have programmed other systems. This system will be just a basic system, no frills... But I will need the programming manual to finish the job..
|
|
|
|
Joined: Mar 2005
Posts: 3
Member
|
OP
Member
Joined: Mar 2005
Posts: 3 |
I searched the internet and the cheapest I can find for a programming manual is $75.00. Kinda pricey for a one time use.
Anyone be willing to scan a quick reference page for this model and email it to me??
It would be greatly appreciated.
|
|
|
|
Joined: May 2003
Posts: 2,267
Member
|
Member
Joined: May 2003
Posts: 2,267 |
You can join the manuals club by clicking on the link at the top of the page for a lot less than $75. You could also download it from our web site for less than $75 (link below). If you do a lot of system programming, the manuals club (the link at the top of the page) is a great deal. ------------------ Avaya Telephone Repair Toshiba Telephone Repair [This message has been edited by paul144 (edited April 05, 2005).]
|
|
|
|
Joined: Nov 2008
Posts: 1
Member
|
Member
Joined: Nov 2008
Posts: 1 |
I have a Strata DK280 that we just moved and it does not come back up. The lights blink and it goes off after about 5 seconds; then it won't turn on at all when trying to turn it off and on again.
Thanks for any help
Albert
Albert theodore
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
Member
Joined: Mar 2001
Posts: 3,869 |
Albert, you should be starting a new topic, but...
You may have a card not seated properly from the move. Pull and reseat all cards, check the power cord by plugging something else into that socket.
Remove the 25 pair cables so no stations are shorting and see if it lives. Pretty basic stuff but it could be that simple.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
Forums84
Topics93,879
Posts637,002
Members49,673
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
47
guests, and
16
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|