web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: May 2005
Posts: 28
Member
OP Offline
Member
Joined: May 2005
Posts: 28
I have a customer with two systems, one is a 424 v3 and the other is a 280 v3. I've put 2 adtran tsu120e's on each end to connect there p2p t1 circuit. the first 8 channels of the t1 are programmed for the phone system and the rest are for there data network. I setup the two cards in each system to be a 8 channel t1 card and setup the programming in *41-0,-1,-2 and *42. The 424 system is setup with a 200 series of extentions, and the 280 has the 300. If i select a t1 trunk on the 424 system I can make a call over the t1 link to the 280 and speak and hear the other party fine, if i try the same on the 280 i get nothing, the number just displays in the screen? Any suggestions?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jun 2005
Posts: 2
Member
Offline
Member
Joined: Jun 2005
Posts: 2
I DONT THINK A 424 AND A 280 CAN WORK THAT WAY. I HAVE SETUP 424 TO 424 BUT AM PRETTY SURE THAT 280 WONT WORK

Joined: Sep 2004
Posts: 1,436
Member
Offline
Member
Joined: Sep 2004
Posts: 1,436
Not too familiar with T1 on a DK, but it seems like the 424 is programmed right, check the outgoing line group and 200 series ext. programming on the 280.

Any DK pros around? Voyager? SS? Anyone?


Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
Joined: Aug 2002
Posts: 4,924
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,924
Likes: 1
Just for info run program 00 and post the software ver of both systems. Then we can dig out the manuals to see what going on.

Joined: May 2005
Posts: 28
Member
OP Offline
Member
Joined: May 2005
Posts: 28
the 280 is running verion rba3x4w and the 424 is running version 3 ( i called tech support and they stopped helping me as soon as i mentioned the 280, they dont support it anymore ) So your help is GREATLY appreciated!

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
Try removing the Adtran from the equation and plug the T1 directly into the DK. Also, did you specify one as a master and the other as a slave in the clocking?

Joined: May 2005
Posts: 28
Member
OP Offline
Member
Joined: May 2005
Posts: 28
I removed the adtran and plugged straight into the jack and have the same issue, yes i have the 424 as master and the 280 as slave. Since i am able to communicate from the 424 to the 280 with a two-way conversation, it seems like it would be a numbering issue on the 280?

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
What slot do you have the RDTU in on the 280? Are both DKs programmed for Tie Wink for the T1 channels? And program 17 LED 2 on for all the T1 channels? I'll email you something on this.

Joined: Mar 2005
Posts: 406
Member
Offline
Member
Joined: Mar 2005
Posts: 406
I would agree with phonemeister make sure your systems are programmed the same for Tie Wink, I would also be careful not to focus completely on the 280, when you activate a T-1 line via the Tie Trunks on the 424 you are actually getting dial tone from the 280 and completing a call; it is the reverse you are having the problem with. Since you have access to Toshibas tech support I will give you a tip we have found effective, we never tell them wheter it is a 280 or 424 rather we focus on the software level of the system ie: a 280 cabinet with 4.3 software is a 424 system Good luck

Joined: May 2005
Posts: 28
Member
OP Offline
Member
Joined: May 2005
Posts: 28
i have the t1 card in slot 2-1 in the 280. Thanks for the reference guide on the t1 programming, that cuts straight to the point! I will make note not to inform tosh tech support on the system type, but just the release. Thanks for the info


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
teleco 4
Who's Online Now
1 members (nonameyet), 110 guests, and 222 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5