|
|
|
|
Joined: Feb 2005
Posts: 196
Member
|
Member
Joined: Feb 2005
Posts: 196 |
Quote/
Used #402 and showed on both ports: Physical 00 & Logical 00. Checked program 4 for the ports 049 and 050 and was correct three digts (249 & 250), but re-entered anyway. Still showing Sta 20 on both. Quote/
Can you dial any two digit numbers, ..21,22,23...etc? Sounds like your on two different systems. Logical and physical ports are not changeable from two to three, they are set in processor programming. Aree you able to connect via laptop and use DK Admin? Might want to do backup and re-intialize the processor.
Sure sounds like two different systems.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2003
Posts: 226
Member
|
|
Member
Joined: Aug 2003
Posts: 226 |
I have never seen a dk280 with 2 digit ports.
Have you traced the cable back to the pdku card
|
|
|
|
|
Joined: Feb 2003
Posts: 34
Member
|
|
OP
Member
Joined: Feb 2003
Posts: 34 |
The other six ports on the card work fine. Just the 2nd and 3rd ports display Ext 20
|
|
|
|
|
Joined: Aug 2003
Posts: 226
Member
|
|
Member
Joined: Aug 2003
Posts: 226 |
Have you ran a software test on the processor. Have you tried a different amp cable. These are only suggestions. If all else fails call a moderator.
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
what ever happened with this
and what was the answer ???
|
|
|
|
|
Joined: Feb 2003
Posts: 34
Member
|
|
OP
Member
Joined: Feb 2003
Posts: 34 |
I installed an additonal PDKU2 to give the customer an addtional 8 Ports. Thanks for your all suggestions. I would have rather found the problem.
|
|
|
|
|
Joined: Apr 2005
Posts: 23
Member
|
|
Member
Joined: Apr 2005
Posts: 23 |
Dumb question but have you checked the cross ccnnect to make sure it is not double jumped?
|
|
|
|
|
Joined: Feb 2003
Posts: 34
Member
|
|
OP
Member
Joined: Feb 2003
Posts: 34 |
PROBLEM SOLVED! I pulled apart the 110 block from the switch and found the White/Green and the White/Slate leads were crossed. Corrected and both ports work fine now. Thanks for all your suggestions.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
146
guests, and
336
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
